Ocean Quest sinking after listing heavily to starboard prpr to sinking. Photo: MAIB
The Marine Accident Investigation Branch (MAIB) has released an update on the sinking of the fishing vessel Ocean Quest.
The update is reported below:
On 18 August 2019 and about 70 miles north-east of Fraserburgh, the UK registered trawler, Ocean Quest, sank as a result of an engine room flood. The source of the flood has not been determined; however, it was almost certainly a result of shell plating or hull weld failure. The crew tackled the flood with fixed and portable pumps but were not able to get the situation under control. The alarm was raised as soon as the flood was discovered, the crew were well prepared for the abandonment and all were rescued safely by a coastguard helicopter.
- Flooding presents an immediate threat, and every effort must be made to pump out the floodwater. In this case, the crew followed their onboard routine for bilge pumping, which meant that sea suction valves were left partly open. This potentially restricted the bilge pumps’ effectiveness and, although this procedure may have been appropriate for bilge pumping, it was not appropriate during an emergency.
- Training and drills help to prepare for emergencies. Ocean Quest’s crew had conducted regular abandon ship drills so were well prepared for that phase of the emergency, and all rescued safely.
- Ultrasonic hull thickness measurement is only a sampling process and does not provide 100% coverage, so is not guaranteed to detect all areas of erosion.
No recommendations are made in this report; nevertheless, it should serve as a reminder to fishing vessel crew of the importance of being prepared for flooding emergencies.
A safety flyer to the fishing industry highlighting a number of the safety lessons was produced for this report.